Product Spec

Model                                                   DH 24 PH 2
Capacity (Concrete)                             3.4 - 24 mm (1/8 - 15/16'')
Capacity (Steel)                                  13 mm (1/2'')
Capacity (Core bit)                              25 - 50 mm (1 - 2'')
Capacity (Wood)                                 32 mm (1.1/4'')
Power Input                                         730 W
Bit Shank                                             SDS-plus
Impact Energy                                      2.7 Joules
No Load Speed                                    0 - 1,050 /min.
Full Load Impact Rate                          0 - 3,950 /min.
Overall Length                                 349 mm
Weight (including cord)                       2.8 kg
Standard Accessories                          Side Handle, Depth Gauge, Carrying Case

Features & Benefits

• Approximately 2 times longer life achieved by reliable structure that includes a hammering mechanism same as our large hammers.
• Hammering mechanism features air channel system. Up to 50% more volume of air cushion reduces wear and damage inside cylinder.
• Ball bearings. Ball bearing seals in grease and holds temperature low to protect melt down of gear cover.
• New internal pressure control mechanism. Provides smooth airflow in or out of the gear cover to stabilize and ensure hammering action.
• Located on the side of the tool body for easy operation! Large change lever.
  • Rotation only for drilling in steel or wood, etc. (with optional drill chuck and chuck adaptor)
  • Rotation + Hammering for drilling into concrete, etc.
  • Hammering only (3-mode models only) chiseling of concrete or groove digging, etc.
• Angle adjustable function (3-mode models only), when using a cold chisel or cutter, the orientation of the tool tip can be adjusted by setting the change lever as shown on the left.
• Simple bit mounting One-push action for quick bit mounting. A bit can be mounted by simply inserting it into the tool holder.